How to Fix if Your Roku Remote Not working?

Is your Roku remote not working? All streaming devices like firestick, Roku app TV, and more come with their standard remote. You can use a remote to navigate options and apps. Sometimes the remote malfunctions or not working. Then you can’t access apps and navigation. In this situation, you can fix your Roku remote yourself by following this guide. So let’s go next.

Roku Remote Not Working

Here are some ways necessary things and solutions to fix the remote of Roku:

1. Check Your Roku Remote Batteries

Do you know if the battery in your device hasn’t gone out? The low performance is an unmistakable signal that the power source might be the reason. Particular Roku remotes will require 2 AA batteries. Other remotes need 2 AAA batteries. Look at the label on the remote to ensure confirmation. The batteries are under the slide panel on the rear of the unit.

Checkout: Roku Tips and Tricks to Improve Your Experience

2. Reset Your Roku Remote

Resetting Roku remotes through a specific sequence within the boot process is possible.

For resetting a Roku remote to factory settings, you must follow these steps in the following steps:

1. Take off the batteries from the remote.
2. Take the power supply out of the Roku stick or box (or visit the Settings menu > System and Restart)
3. Wait and after ten seconds, plug in your Roku box to power.
4. The home screen appeared.
5. Insert the back batteries into the remote. 

3. Verify HDMI Interference

In its official document, Roku accepts that the remotes of its models are prone to interference due to very close HDMI cables.  This issue is particularly present for Roku streaming sticks, which are directly connected to an HDMI connection on your television.

The best option is to use the HDMI extension cable that allows the streaming device to be positioned further away from the television’s HDMI port.

4. Make sure you are connected to WiFi

If you’ve gone through all the Roku remote troubleshooting suggestions but haven’t had any luck, your WiFi connection may be at fault. The Roku remote does not require Internet connections to communicate with your gadget. It requires the existence of a local network. If your internet connection isn’t operating for reasons beyond your control, your remote won’t work until your network is repaired. It is worth checking the router’s settings when you have the expertise of technical knowledge. There could have been something wrong that caused the router’s connection to be blocked.

Here is a guide to fixing Roku Remote Volume Not Working

5. Make use of your smartphone as Roku Remote

If your remote from Roku is not working, You can use your smartphone to function as a remote for Roku. You must set up Roku, the official Roku Remote. Once you have installed it, you’ll be required to log in with credentials from your Roku credentials. Then you can utilize the smartphone as a remote control for Roku.

6. Replace the Remote for Your Roku

If you have tried the above ways to fix Roku remote not working. Then it would help if you bought a new remote for Roku. But before purchasing a remote, you have to check compatibility.

Ian Victor